TECHNICAL/APPLICATIONS 

Modelpan is a Multi-purpose building board which can be easily used both interior and exterior application in buildings. With its high thermal and sound insulation capacity, plus water and impact resistance it offers further advantages over traditional building boards and cladding. 
With insulation materials such as XPS, EPS, rock wool, glass wool, polyurethane foam and expanded perlite contained in it, Modelpan building board can be used to build partition walls and SIP panels which provide a very high level of heat, sound and fire insulation. 
 
APPLICATIONS: 
 
Interior and exterior cladding 
Spread of fire prevention(Passive)Class A1 Non Combustible 
Suspended ceilings and elevated floors 
Sound insulation(12mm=35dB) 
Sub-roof boards 
Prefabricated and lightweight steel constructs 
Interior wall partition systems 
Fire insulation of carrier systems in steel constructs 
Insulation of cold storage areas 
Subfloor support material 
Places where water and humidity are prevalent 

TECHNICAL INFORMATION 

Product Data Sheet: Magnesium Oxide (MgO) Board 
Description of Product: MgO Board/fireproof/water resistant/ impact and acoustic boards (Magnesium Oxide Board) 
Places of Applications: Residential, commercial and industrial building and construction, partition walls, internal and external sheathing, flooring systems, common finishes, suspended and acoustic ceilings, etc. Modelpan boards are lighter, flexible, pliable and more cost effective than traditional sheeting systems significantly reducing installation cost over a project at times offering savings of on materials and labour to that of traditional fire separation and party wall systems. 
 

STORAGE & HANDLING 

It is the responsibility of the builder to ensure that the product meets aesthetic requirements before installation. MODELPAN will not be responsible for rectifying obvious aesthetic surface variations following installation. MODELPAN Magnesium Oxide Board sheets must be stored flat on a smooth surface. Precaution should be taken that edges and corners are protected from damage. Ensure that all sheets are stored under cover and kept dry. If Sheets become wet they must be dried prior to installation. Carry sheets in the vertical position as this will avoid bending and possible breakage. 

CONSTRUCTION MATERIAL FINISHES 

All Modelpan products have been certified and registered under the international standards. 
 
Ingredients: 
MgO (Magnesium Oxide) 
MgCl2 (Magnesium Chloride) 
Perlite (SiO2) 
Sawdust 
Multiple layers of Glass fibre mesh and non-woven fabric 
 
PERFORMANCE CHARACTERS: 
 
Density: Approx density of each thickness is 0.95-1.05 10g/cm3, we are able to adjust during production if required 
Fireproof characteristic: Class A1 Non-Combustible(Passive Fire Protection) 
Intensity of bending resistance: 14Mpa 
The Rate of deformation with moisture pickup: 0.25-0.30% 
The shrinking rate when heated: 1.0% 
Water permeability: No water passes through the board 
Impact resistance: Hammer impact has little effect 
100% Non Toxic does not contain the asbestos, formaldehyde, benzene and heavy metals 
 
 
 
 
 
 
 
 
 
 

M² WEIGHT PER THICKNESS OF MODELPAN PANELS 

4 mm 
4 kg / m² 
6 mm 
6 kg / m² 
8 mm 
8 kg / m² 
10 mm 
10 kg / m² 
12 mm 
12 kg / m² 
14 mm 
14 kg / m² 
16 mm 
16 kg / m² 
18 mm 
18 kg / m² 
20 mm 
20 kg / m² 
25 mm 
25 kg / m² 
26 mm 
26 kg / m² 

TECHNICAL PROPERTIES 

Identification 
Magnesium Oxide Building Boards 
Content 
Magnesium oxide & other additives 
Surface Appearance 
Smooth surface (ready for paint/render applications) 
Density 
1000 kg/m3  
Bending strength 
14 N/mm2 (average) 
Compress strength 
20 N/mm2 
Freeze strength 
Freeze and Frost resistant 
Water permeability 
Impermeable 
Fire resistance 
Class A1 Non Combustible  
Impact resistant 
Highly Resistant 
Harmful Material 
Acoustic Values 
12mm board=35dB sound reduction 
Int Humidity Rate 
< 5% 
Cutting  
Boards <12mm can be "score/cut" like plasterboard 
Fixing 
Use of Stainless Steel(Grade 316) Screws/Nails at 
12-13mm from edge and 50mm at corners with 200mm 
centers and 3mm gap which can be filled and sanded  
CONTACT US TODAY ON 01592 631636 WITH YOUR MODELPAN REQUIREMENTS 
 
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings